Search Results

This standard specifies requirements for DPRV to establish common product/service requirements for use at all levels of the supply chain. This standard shall apply when an organization elects to delegate product release verification by contractual flow down to their supplier (reference 9100 and 9110 standards); to perform product acceptance on their behalf. The delegating organization shall use this standard as the baseline for establishing a DPRV process, although they may include additional contract requirements to meet their specific needs.

The basic requirements of AS9100A apply with the following clarifications. This document supplements the requirements of AS9100A for deliverable software. This supplement contains Quality System requirements for suppliers of products that contain deliverable embedded or loadable airborne, spaceborne or ground support software components that are part of an aircraft Type Design, weapon system, missile or spacecraft operational software and/or support software that is used in the development and maintenance of deliverable software. This includes the host operating system software including assemblers, compilers, linkers, loaders, editors, code generators, analyzers, ground simulators and trainers, flight test data reduction, etc., that directly support creation, test and maintenance of the deliverable software.

Limited to the Commercial Aerospace industry where a request is made for a Production Organization (PO) to have Direct Delivery Authorization (DDA), which includes an Appropriate Arrangement (AA) between the PO and the Design Organization (DO). In this process the DO is responsible for ensuring the continuous updating of design and airworthiness data to the PO, whilst the PO is responsible for assurance that the manufactured article conforms to Approved Design and Airworthiness Data. The PO is responsible to provide airworthiness release documentation.

Limited to the commercial aerospace industry where a request is made for a PO to have Direct Delivery Authorization (DDA), which includes an Appropriate Arrangement (AA) between the PO and the Design Organization (DO). In this process the DO is responsible for ensuring the continuous updating of design and airworthiness data to the PO, whilst the PO is responsible for assurance that the manufactured article conforms to approved design and airworthiness data. The PO is responsible to provide airworthiness release documentation.

Limited to the Aerospace industry where an approved manufacturer requests a supplier to ship an article against the approved manufacturer's quality system directly to a customer. The direct ship process is not required or applicable to standard parts or military parts. In this process the approved manufacturer is responsible for assurance that the article conforms to Type Design information.

Limited to the Aerospace industry where an approved manufacturer requests a supplier to ship an article against the approved manufacturer’s quality system directly to a customer. The direct ship process is not required or applicable to standard parts or military parts. In this process the approved manufacturer is responsible for assurance that the article conforms to Type Design information.

Limited to the aerospace industry, where an approved manufacturer requests a supplier to ship an article against the approved manufacturer’s quality system directly to a customer. The direct ship process is not required or applicable to standard parts or military parts. In this process the approved manufacturer is responsible for assurance that the article conforms to type design information.

Limited to the Aerospace industry where an approved manufacturer requests a supplier to ship an article against the approved manufacturer’s quality system directly to a customer. The direct ship process is not required or applicable to standard parts or military parts. In this process the approved manufacturer is responsible for assurance that the article conforms to Type Design information.

This document is limited to the aerospace industry, where an approved manufacturer requests a supplier to ship an article against the approved manufacturer’s quality system directly to a customer. The direct ship process is not required or applicable to standard parts or military parts. In this process, the approved manufacturer is responsible for assurance that the article conforms to type design information.

This standard defines FOD Prevention Program requirements for organizations that design, develop, and provide aviation, space, and defense products and services; and by organizations providing post-delivery support, including the provision of maintenance, spare parts, or materials for their own products and services. It is emphasized that the requirements specified in this standard are complementary (not alternative) to customer, and applicable statutory and regulatory requirements. Should there be a conflict between the requirements of this standard and applicable statutory or regulatory requirements, the latter shall take precedence.

This document has been prepared and issued to provide information and guidance on the application of AQAP 2110 when the Supplier adheres to the provisions of 9100. This document is published as AQAP 2009 Annex F and 9137. It was jointly developed by NATO and industry representatives for use by NATO and industry to facilitate the use and understanding of the relationship between the AQAP 2110 and 9100.

This document contains the minimum requirements for supplier Inspection and Test Quality System. It is emphasized that the quality system requirements specified in this standard are complementary (not alternative) to the contractual and applicable law and regulatory requirements.

This standard includes selected quality system requirements from ISO 9001:2008[1] and AS9100:2009 applicable to noncomplex products and associated manufacturing processes. ISO 9001 text incorporated into this standard appears in standard font; while aviation, space, and defense industry additional requirements, definitions, and notes are presented in bold, italic text. The requirements of this standard are intended to be applied in whole, without any exclusions. Compliance with all corresponding AS9100 requirements is considered to meet/exceed compliance with the requirements of this standard. The requirements specified in this standard are complementary (not alternative) to contractual and applicable statutory and regulatory requirements. Should there be a conflict between the requirements of this standard and applicable statutory or regulatory requirements, the latter shall take precedence. The process approach described in ISO 9001 and AS9100 applies to this standard.

This standard includes selected quality system requirements from ISO 9001:2008[1] and AS9100:2009 applicable to noncomplex products and associated manufacturing processes. ISO 9001 text incorporated into this standard appears in standard font; while aviation, space, and defense industry additional requirements, definitions, and notes are presented in bold, italic text. The requirements of this standard are intended to be applied in whole, without any exclusions. Compliance with all corresponding AS9100 requirements is considered to meet/exceed compliance with the requirements of this standard. The requirements specified in this standard are complementary (not alternative) to contractual and applicable statutory and regulatory requirements. Should there be a conflict between the requirements of this standard and applicable statutory or regulatory requirements, the latter shall take precedence. The process approach described in ISO 9001 and AS9100 applies to this standard.

This document provides a basic uniform method for ensuring that aerospace standard parts (products) conform with the requirements of technical specifications referring to qualified parts and for a manufacturer of such parts to have a qualified management system at least equivalent to AS/EN/SJAC9100. These standards apply when called out in the aerospace standard part standard.

This standard defines a system for the qualification of standard products for aviation, space, and defense applications. It defines the principles that shall be adhered to when carrying out product qualification; applied in conjunction with the rules and procedures of the CA. The system enables the CA to confirm compliance is achieved and maintained, in accordance with the requirements of its product definition and associated controlling technical specifications by an Original Component Manufacturer (OCM) of standard products. This standard requires an OCM that has been granted product qualification approval to ensure applicable approvals are maintained and renewed in accordance with the CA’s quality system for that qualified product. OCMs and OCM designated Value Added Distributors (VADs) requesting product qualification to this standard, shall as a prerequisite, maintain 9100 standard quality management system certification approval.

This standard includes ISO 9001:20001 quality management system requirements and specifies additional requirements for a quality management system for the aerospace industry. The additional aerospace requirements are shown in bold, italic text. It is emphasized that the quality management system requirements specified in this standard are complementary (not alternative) to contractual and applicable law and regulatory requirements. This International Standard specifies requirements for a quality management system where an organization a) needs to demonstrate its ability to consistently provide product that meets customer and applicable regulatory requirements, and b) aims to enhance customer satisfaction through the effective application of the system, including processes for continual improvement of the system and the assurance of conformity to customer and applicable regulatory requirements.

This standard includes ISO 9001:20001 quality management system requirements and specifies additional requirements for a quality management system for the aerospace industry applicable to stockist distributors. The additional aerospace requirements are shown in bold, italic text. It is emphasized that the quality management system requirements specified in this standard are complementary (not alternative) to contractual and applicable law and regulatory requirements. This International Standard specifies requirements for a quality management system where an organization a needs to demonstrate its ability to consistently provide product that meets customer and applicable regulatory requirements, and b aims to enhance customer satisfaction through the effective application of the system, including processes for continual improvement of the system and the assurance of conformity to customer and applicable regulatory requirements.